Table of Contents
Advertisement
Warm
and c ol d
Fig. 72
4-zone deluxe automat ic climate control system:
rear controls
Press the buttons to turn the functions on or off.
Use the controls to adjust the temperature,
the
blower speed and the air distribution. The LED in
a button will light up when the function is
sw itched on . The front settings are shown in the
climate control system display and in the Info-
tainment system disp lay for a few seconds . The
driver and front passenger settings can be ad-
justed separately.
The settings can also be adjusted in the rear
~ fig. 72.
IO FF !
Switchin g the climate control system
on/ off
The
I OFF I
button switches the climate control
system on or off. It also switches on whe n you
press the cont rol. Airflow from outside is blocked
when t he climate control system is switched off .
The
IO FF I
button in the rear only switches the A/C
system on/off in the rear of the vehicle.
IA/C l
Switching cooling mode on/ off
The air is not cooled and humidity is not removed
when cooling mode is switched off . This can
cause fog on the windows. The cooling mode
switches off automatically when there are cold
outside temperatures.
l""" I
Switch ing recirculation mode on/ off
In recircu lation mode, the a ir inside the vehicle is
circu lated and fi ltered. This prevents the unfil-
tered a ir outside the vehicle from entering t he
vehicle inter ior. We recommend switching recir -
culation mode on when driving through a tunne l
or when sitting in traffic ~ .&..
62
The
!AU T OI
button or
I@ FRON T I
button switches
recircu lation mode off .
IAUTO
I
Switching automatic mode on
Automat ic mode maintains a constant tempera-
ture inside the vehi cle. Air temperature , a irflow
and air distrib ution are controlled automatica lly.
If press and hold the button longer, 72 °F (22 °C)
will be set.
Adjusting the temperatu re
Temperatures
between 60 °F (+16 °() and 84 °F
(+28 °() can be set . Outside of this range, LO or
HI
w ill appear in the climate control system dis-
play. In both settings, the climate control runs
constantly at the max imum coo ling or heat ing
level. The temperature
is not regu lated .
Adjusting the blower ~
You can adjust the volume of air generated by the
blower t o your preference . The blower should al-
ways run at a low setting to prevent the windows
from fogg ing and to ensure a cont inuo us ex-
change of a ir inside the vehicle . To have the blow -
er regulated automatically,
press the
IAU T O I
but-
ton.
~
Adjusting air distribution
You can man ua lly select the vents where the air
will flow. To have t he air distr ibut ion regulated
automat ically, press t he
IAU T O I
button.
~
Adjusting seat heat ing*/ seat ventilation*
Pressing the button switches the seat heating/
seat ventilation on at the highest setting (level
3). The LEDs ind icate the temperature
level. To
reduce t he temperat ure, press the button again.
To switc h the seat heat ing/seat ventila t ion off,
press the button repeatedly until the LED turns
off.
After 10 m inutes, the seat heating au tomatically
switches from level 3 to level 2.
l<ii>
FRON T
I
Switching the defroster on/ off
The w indshield and side windows are defrosted
or cleared of condensat ion as quick ly as poss ible.
The maxim um amount of ai r flows mainly from
t he vents below the windsh ield. Recirculation
..,.
Advertisement
Table of Contents
