Table of Contents
Advertisement
A ss ist
@
Tips
Make sure the camera's fie ld of view
¢
fig. 102
is not obstructed by st ickers or any-
thing else. For information on cleaning, refer
to¢
page 235.
View in instrument cluster display
Appl ies to: vehicles with Audi active lane assist
Fig. 103 Instrument cluster: act ive lane assist is sw itc hed
on and prov iding warn i ngs
Fig. 10 4 Inst rument cluster: act ive lane assist is switc hed
on but not ready to provide warnings
You can call up the active lane assist display us-
ing the buttons in the multifunction steering
wheel ¢
page 21.
An addit iona l indicator appears in the Head -up
disp lay*.
White line(s)
Active lane assist is activated
and ready to provide warnings.
Red line(s)
Active lane assist warns you
(left or right)
before leaving a lane
¢ fig. 103.
In addit ion, the
steering wheel vibrates light ly.
Gray line(s)
Active lane assist is activated,
but not ready to give warning
¢ fig. 104.
98
Messages in the instrument cluster disp lay
If t he active lane assist sw itches off automa ti cal-
ly, the indicator light in the display turns off and
one of the fo llow ing messages appears:
Audi active lane assist : Currently unavailable.
No camera view
This message appears if the camera is unable to
de t ect t he lines. This could happe n if:
- The camera field of view¢
page 97, fig. 102
is
dirty or covered in ice . Clean th is area on the
w indshield.
- The camera fie ld of view is fogged over. Wait
until the fog has cleared before switch ing the
active la ne assist on aga in .
- The system has been unable to detect the lanes
for an extended period of t ime due to road con-
ditions . Switch act ive lane assist back on when
t he lines a re more visib le.
Audi active lane assist: Currently unavailab le
There is a temporary act ive lane assist malfunc-
tion. Try switc hing the active lane assist on again
later.
Audi acti ve lane assist: System fault!
Drive t o a n au t hor ized Audi dealer or aut horized
Audi Service Facility immediate ly to have the
malfunction corrected.
Audi active lane assist : Please take over steering
This message appears if you are not steer ing by
yourself . If this is the case, active lane assist does
not switch off, but it is "not ready" t o provide a
warning. The system can help you keep t he vehi-
cle in the lan e. However, you are responsible for
driving the vehicle and must steer it yourse lf.
Adjusting the vibration warning
Applies t o: vehicles wit h Audi acti ve lane assist
.,. Select: the
I CARI
function button > (Car)
*
Sys-
tems
contro l button > Driver assistance > Audi
active lane assist.
Vibrat ion warning
You can swi t ch the addit io nal vib rati on war ning
in the steering whee l on or off .
Ill-
Advertisement
Table of Contents
