Advertisement
FOR YOUR SAFETY
>
CAUTION:
TO
PREVENT
FIRE
OR
SHOCK
HAZARD
AND
IMPORTANT
"Unauthorized
recording of copyrighted television
programmes, films, video tapes and other materials
may infringe the right of copyright owners and be
contrary to copyright laws."
ANNOYING
INTERFERENCE,
USE
THE
RECOM-
MENDED ACCESSORIES ONLY.
Be
Ee
ae
oe
:
i
ae
a
.
e
ae
a
ae
*
as
ae
a
4
Se ree
@ THIS APPARATUS MUST BE EARTHED.
To ensure safe operation the three-core lead supplied
(not for U.K. model) must be connected only into a
standard
three-pin
power
point which
is effectively
earthed through the normal household wiring.
Extension cords used with the equipment must be three-
core and be correctly wired to provide connection to
earth. Wrongly wired extension cords are a major cause
of fatalities.
Before connecting to the power supply, ensure that the
your local power supply.
The voltage selector can be adjusted, if necessary, by using
a screwdriver,
but this adjustment
must be made after
disconnecting the power cord.
m AC POWER CORD CONNECTION (AG-7500-B only)
The wires in the mains
lead for this apparatus are
selector on the rear panel is selected to the same voltage as
|:
'
The fact that the equipment operates satisfactorily does
not imply that the power point is earthed and that the
coloured in accordance with the following code.
Important
installation is completely safe. For your safety, if in any
doubt about the effective earthing of the power point,
consult a qualified electrician.
EARTH
NEUTRAL
Mm DO NOT REMOVE PANEL COVER BY
UNSCREWING.
To prevent electric shock, do not remove cover. No user
serviceable parts inside. Refer servicing to qualified
service personnel.
Mains Lead
The
power
cord
must
be
disconnected
from
mains
before the voltage selector
setting is changed.
AG-7500
can
be used
on
either 110, 120, 220, or 240V
AC.
AG-7500-E is preset to 220V
at the factory. AG-7500-A
and -B are preset to 240V at
the factory.
marked by the letter E or by the safety earth symbol
coloured GREEN or GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to
the terminal
which
is marked
with the letter N or
coloured black.
The wire which is coloured BROWN must be connected
coloured red.
Remark:
This apparatus was produced to BS 800: 1983.
Dieses Modell entspricht der EG-Vorschrift (fur Funkst6rungsschutz) 82/499/EG.
La Société PANASONIC-FRANCE, importateur du matériel MATSUSHITA-JAPON déclare que cet appareil est conforme aux
prescriptions de la directive 76/889/C.E.E. modifiée par la directive 82/499/C.E.E.
Dit model is onderworpen aan de EEG-richtijn (ter voorkoming van radio-interferentie) 82/499/EEG.
Denne model opfylder EF direktiv 82/499/EF (for forebyggelse af radiointeferens).
La Societa PANASONIC ITALIA S.p.A., importatrice di questo prodotto, dichiara che questo apparecchio @ conforme alle
disposizioni della direttiva C.E.E./82/499 (D.M. 10 aprila 1984).
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
& is the safety information.
As the colours of the wires in the mains lead of this x
apparatus
may
not
correspond
with
the
coloured
|*
markings identifying the terminals in your plug proceed
|:
The wire which is coloured GREEN-AND-YELLOW
o
must be connected to the terminal in the plug which is |%
or |
to the terminal which is marked with the letter L or |4
Advertisement
