Table of Contents
Advertisement
System connections
Make connections as shown in the diagram below. When connecting the related system components, refer also to
the instruction manuals of the related components.
Do not plug in the power lead until all connections are completed.
H Connection of audio components
Tape deck 2
AC outlet
AC voltage selector switch
(Except for some areas.)
FM DE-EMPHASIS /
SpeakersyatemyA
CHANNEL SPACE switch
Seccececectatettctal
(Except for some areas.)
eoetetetetetetets
PSE 95625
Wegeseneces
KS Maceces
oe,
soxeges
<0
<5 Ko
System control jacks
Refer to page 10.
Refer to "Antenna
connection" on
page 8.
Bie
To wall
AC outlet
'SEE INSTRUCTION
MANUAS FOR CORRECT SA
SPEAKER
IMPEDANCE
Refer to page 7.
EX
sotatetetateea
sa cecerece,
RSS?
ecasececececececicic
stetetetetetetetet
petatcecteecectes
Reese
Center speaker
Speaker system B
Tape deck 1
CD player
Notes:
1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit.
3. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging / unplugging
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
4. Never short-circuit the + and — speaker cords.
5. if the left and right speakers are connected inversely or if the speaker cords are connected with reversed polarity, the sound becomes
unnatural with ambiguous acoustic image positioning. Be sure to connect the speakers and speaker cords correctly.
6 KR-V8050 (En)
Advertisement
Table of Contents
