System Connections - Kenwood KR-V8040 Instruction Manual

System connections
Make connections as shown in the diagram below. When connecting the related system components, refer also to
the instruction manuals of the related components.
Do not plug in the power lead until all connections are completed.
HM Connection of audio components
Tape deck 2
AC outlet
AC voltage selector switch
(Except for some areas.)
FM DE-EMPHASIS / Speaker system A
CHANNEL SPACE
switch Seca For U.K.
(Except for some areas.) pose"
See80 SPEAKER
IMPEDANCE '
Refer to
SELECTOR
"Antenna Refer to page 7.
(For other than
U.S.A.and Canada}
connection" on
To wall
AC outlet
'SEE INSTAUCTION MANUAL FOA CORRECT S&T ENG
System control
a jiacks
Refer to page 10.
Serre FF ITS,
SOY? QeORY
?
Rear speakers
PP SOC C S Le IO OC od
Seeceeeceseetahetabghchcte's
enerererecereren
r sec hchctet ated
Mereterererererererereud
aratarerererertrent,
Wresereceterecenece:
ROKR RKC
Weeeratatarateres
CEL8,2,2,2,
Tape deck 1
CD player
Notes:
1. Connect all cords firmly. lf connections are loose, there could be loss of sound or noise produced.
2. Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit.
3. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging / unplugging
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
4, Never short-circuit the + and - speaker cords.
5. If the left and right speakers are connected inversely or if the speaker cords are connected with reversed polarity, the sound becomes
unnatural with ambiguous acoustic image positioning. Be sure to connect the speakers and speaker cords correctly.
6 KR-V8040 {En)