Connection For System Control Operation - Kenwood KR-V8050 Instruction Manual

Hide thumbs Also See for KR-V8050:
Table of Contents

Advertisement

System connections
M@ Connection for system control operation
Using the system control cords provided with KENWOOD
system component models, make connections as shown
Turntable
below.
@
Foracassette
deck to
be subject to system
control operation,
it
must
be connected
to the TAPE 1 jacks.
Cassette deck
CLEA
et
AL
| wig 3 SL gy
=)
98H
eS
5}
System control cord
CD player
System control connection
ja
e Be sure to insert the system control cord plugs fully
into the SYSTEM CONTROL terminals.
@ If the system control cord and audio cords are not con-
nected properly, the automatic system governing re-
mote contro! and system functions will not operate.
10 KR-V8050 (En)
2 To AC outlet
System control cord
Operation
By connecting this unit to KENWOOD cassette deck,
CD player and turntable models equipped with sys-
tem control jacks, the following integrated operation
features become available.
1. Automatic play operation
When starting play with the turntable, cassette deck, or CD
player connected
to the receiver, press the desired input
selector keys on the receiver. The turntable, cassette deck,
or CD player will automatically enter play mode.
In the same way, pressing the Play key of the turntable,
cassette
deck, or CD player will automatically switch the
input selector on the receiver to the component on which
the Play key is pressed.
2. Synchro recording
To record the sound from the CD player or turntable onto a
tape with the cassette deck, press the CD or PHONO of the
input selector keys and load a CD or record. Set the cassette
deck to rec pause mode, then press the Play (start) key of
the CD player or turntable. The cassette deck will start re-
cording automatically, synchronized with the CD player or
turntable starting play.
3. Remote control
The remote control unit provided with this unit, to which a
KENWOOD system turntable, cassette deck, or CD player is
connected, is equipped with related control keys. The related
components can be controlled using these keys.
|

Advertisement

Table of Contents
loading

Table of Contents