Table of Contents
Advertisement
System connections
Make connections as shown in the diagram below. When connecting the related system components, refer also to the
instruction manuals of the related components.
Do not plug in the power lead until all connections are completed.
HM Connection of audio components
For the connection of video components, please refer to page 22.
Speaker system A
Speaker system 8
Center speaker
Rear speakers
Right
Left
Right
Left
Right
Left
FM DE-EMPHASIS/
CHANNEL SPACE switch ~
{Except for same areas.}
77 AC voltage
selector switch
(Except for
some areas.)
Refer to the "Antenna
connections" section.
To AC
outlet
AC outlets
a
\ Refer to the
"System control
operation section.
;
For other than
:
USA and Canada
Refer to the "Setting
the speaker IMPEDANCE
SELECTOR™ section.
Tape deck 2
Tape deck 1
Notes:
1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced.
2. Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit.
3. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging connec-
tion cords without removal of the power cord can cause malfunctions or damage to the unit.
6
KR-V8030 (En)
Advertisement
Table of Contents
