Table of Contents
Advertisement
mM Operation of remote control unit
The supplied remote control unit has two operation modes: [USE] , for operating various components
in your
system, and
_ for programming ("learning") the remote control functions of other AV equipment.
There are two [USE| modes. One is AUDIO mode, for operating KENWOOD
system audio components, another is
AUX mode, for operating other optional equipment.
mode is used to program the functions of other components into this remote control unit. This lets you
perform the functions of several remote control units using a single remote control unit.
LEARN / USE switch
LEARN
USE
Set to USE
for operating
various
components in AUDIO mode or AUX
mode.
Set to LEARN
when
programming
function of other remote control unit.
POWER key
Turn the power of components ON /
OFF.
Numeric keys
When
the
CD/LD
source
is se-
lected, these keys can be used as the
numeric keys of the CD/LD player.
When the TUNER source is selected,
they can
be used
as the numeric
keys of the tuner.
How to enter numerals:
For 23 press
twice and [3]
For 40 press
four times and [6]
Input selector keys
These keys operate the input selec-
tor.
KENWOOD
UNIVERSAL PROGRAMMABLE
REMOTE
CONTROL
UNIT
RC-RO800
LEARN © TRANSMIT
LEARN
USE
AUDIO
AUX
SURROUND MEMORY
ra
ts)
DOLBY
DOLBY
BYPASS
PROLOGIC
3STEREO
DSPLOGIC
DSP
CENTER
MODE
MUTE
TEST.
TONE
VIDEO 1
DELAY
TIME
LEARN indicator
Blinks or lights steadily during pro-
gramming procedure.
TRANSMIT indicator
Lights up while the remote control
signal is being transmitted.
Mode switch
AUDIO
AUX
Set this switch according to the type
of component you plan to operate.
AUDIO: For audio component.
AUX — : For programmed component.
MUTE key
Press to reduce the volume tempo-
rarily.
During operation, the indicator on the
VOLUME CONTROL knob blinks.
VOLUME CONTROL keys
Press to control the volume.
During control operation, the VOL-
UME
CONTROL
knob on the
main
unit rotates and the indicator on it
flashes
rapidly.
KR-V8050 (En) 15
Advertisement
Table of Contents
