About The System Control Connections - Kenwood 106VR Instruction Manual

About the system control connections
1D6VR/105VR (En)
ABOUT THE SYSTEM CONTROL OPERATIONS
Remote Control (possible when the system control mode
matches)
Lets you operate source components with the system remote
supplied with this unit.
Automatic Operation (Except [XR] equipment)
When you start playback from a source component the input
selector on this unit switches to that component automatically.
(Except TAPE
2
)
Synchronized Recording (Except [XR] equipment)
Lets you synchronize recording with the start of playback when
recording from CD, MD. [
SWITCHING BETWEEN [XS8] AND [SL16]
The system control mode can be switched over easily with the
following operation.
O
Unplug the AC power cord from the wall outlet
© Set the SYSTEM CONTROL switch on the rear panel to the desired
position.
SYSTtM
CONTBOL
(O)
[ operation does not affect the items stored in memory
I
1 Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced
cords without removal of the power cord can cause malfunctions or damage to the unit
3. Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit