Entry And Display Of Station Names Ou; Esse Ccteneeeeeeeeees - Kenwood KR-V8050 Instruction Manual

Listening to a broadcast
m@ Entry and display of station names
Station names composed of up to four digits of characters and / or symbols can be displayed on the display.
Example: To receive FM 98.80 MHz, input its name with characters "CBE", and preset them under numeric key ;
1 Initiate the character entry mode.
P,CALL DIGIT CHARACTER
Main unit only
Receive the frequency of
the desired station and
initiate the character entry
mode.
Select the characters to be displayed
with that station.
@ Display the desired character.
BAND \" TUNING "%
\ /
\ vs =
C L Blank position
/#-+98 3210
Main unit
e Toselect "C", press the UP segment three times.
@) Establish the selection.
P.CALL DIGIT CHARACTER
Main unit only
Types of characters that can be input
After having pressed the CHARACTER key, press the
TUNING key to display the characters available.
@ Repeat steps © and @) until all of the required
characters have been input.
@ To insert a space, simply press the DIGIT key.
28 KR-V8050 (En)
3 End the character input.
P.CALL DIGIT CHARACTER
Main unit only
@ The character input also terminates automatically
when fourth character has been input.
e Press the CHARACTER key to terminate character in-
put with three characters or Jess.
4 Preset them under key :
@) Press the MEMORY key.
BAND \" __JUNING
MEMORY _ DIRECT AUTO
Main unit only
MEMORY indicator lights up for about 5 seconds.
e Proceed the step @ while the MEMORY indicator is
lighted.
@ Press the numeric key '
Main unit
Last channel memory
When the band selector is switched or when the input selector
is switched from another source to TUNER, the last received ~
station is recalled for each of FM, AM when the power is
switched ON.