Table of Contents
Advertisement
Operation of video components
KENWOOD aunx-vnte stenge neciven Kav
M@ Playback of videotape
1 Switch the power of the monitor TV ON.
2. Press the VIDEO 1 key.
hr
pei
| ron
|
Ue ONTTOR
Main unit
@ When an input selector key other than VIDEO 1, or 2 is
pressed, the audio input of the selected source will be
played in place of the audio input from VIDEO 1.
3 Play the VCR.
4 Adjust the volume.
VOLUME CONTROL
415
16
2
Su ig
38 KR-v8050 (En)
VIDEO 2 key
VOLUME CONTROL knab
VIDEO 1 key
Recording of video source
Connect the video equipment.
Connect the video equipment for use in audio /
video recording to the VIDEO 2 jacks.
e A video player deck, video camera,
LD player, DBS
tuner, etc., can be connected.
Press the VIDEO 2 or CD / LD key.
eee [me [aes [om [we Pom [on |
Main unit
e Press the CD/LD key when it is required to play the
audio of the LD player.
@ When an input selector key other than VIDEO 1 or 2 is
pressed, the audio input of the selected source will be
|
played in place of the audio input from VIDEO 2.
Play the video source component.
Put the VCR in the record mode.
Advertisement
Table of Contents
