Tape-To-Tape Recording - Panasonic SC-AK15 Operating Instructions Manual

n
c
2
da
$
9
2
?
È
©
a
DECK 1 DECK 2
z) FLAT
a4
H (TRPE)
Tape direction of the tape
you are recording onto.
Eare]
|Tapo-to-tape recording |
The recording level will be recorded as they are on the tape being
played back.
[U] Press TAPE DECK 1/2.
Press 4 OPEN on both decks and insert the tapes.
For playback: into Deck 1
For recording: Into Deck 2
Close the holders by hand.
Tape direction is automatically set to ">",
Bl Press REV MODE to select the reverse mode.
Every time you press the button:
zZ > DD > G
teca
= :One side is recorded, then recording stops auto-
matically.
=), «x :Both sides (front side — reverse side) are
recorded, then recording stops automatically.
a Press TAPE EDIT to start recording.
e If you selected "<=>" in step E, the direction will automatically
change to ">" when recording starts.
To stop recording
Press O.
Both decks will stop.
To start recording on the reverse side
Load a tape and change the tape direction as following.
1. Press TAPE DECK 1/2 and select tape Deck 2.
2. Press < and immediately thereafter o. The tape direction will be
shown as "<2",
To record trom a specific point on a tape
Before recording, advance the tape to the point from where you want
to start recording.