Using The Record Timer - Panasonic SC-AK15 Operating Instructions Manual

Table of Contents

Advertisement

Timer
operations
ey
@PLAV/OREC
[Using the record timer
« Make sure that you have completed "Setting the time" on page 9.
e Switch on the power.
Set the timer at least 2 minutes before you want to start recording.
The figure shows how to set the record timer for recording FM
broadcasts from 6:30 p.m. to 8:00 p.m.
Fale @ Press CLOCK/TIMER to select "OREC".
bind
Every time you press the button:
CLOCK — OPLAY — OREC
Previous display
@) (Within 10 seconds or so)
Press V or A to set the start time display flashing.
© Press V or A when the start time display is
flashing to set the start time.
@) Press CLOCK/TIMER.
Finish time flashes.
"OFF" time setting
®© Press V or A to set the finish time.
@ Press CLOCK/TIMER.
Display returns to original mode.
Select the desired source and then prepare for
recording.
To record from the radio
Press TUNER BAND to select
"FM" or "AM" and tune in the
desired station.
To record from a unit connected to the "AUX" terminals
Press AUX.
D: Prepare for recording.
i
1. Insert a tape into Deck 2 with the side on which the
recording will start facing you.
2. Select the reverse mode.
Reverse mode does not become part of the timer memory.
'6 Press OPLAY/OREC to select "OREC".
a Every time you press the button:
OPLAY—> OREC
t_ (OFF}—
Power will shut OFF automatically in a few seconds.
About 30 seconds before the set time, recording will start with
all sound muted automatically.

Advertisement

Table of Contents
loading

Table of Contents