Before Recording (Deck 2 Only); Tape-To-Tape Recording - Panasonic SC-AK14 Operating Instructions Manual

A
Recording part
1
2
4
1
2
3
4
Tape direction of the tape you are recording
onto
Leader tape (no recording
can be made)
2
3

Before recording (Deck 2 only)

Types of tapes which can be recorded correctly
The unit automatically identifies the type of tape.
NORMAL POSITION/TYPE I
HIGH POSITION/TYPE II
METAL POSITION/TYPE IV
Metal position tapes can be used, but the unit will not be able to
record or erase them correctly.
To record from the beginning of the tape A
You cannot record on the leader part of the tape. Before recording,
wind the tape past the leader to a point where recording can start
immediately.
How volume, sound quality/field affect recording
The tape you are recording is not affected whatsoever by changes in
volume, sound quality/field.
To erase a recorded sound
1. Press [TAPE, DECK 1/2].
2. Insert the recorded tape into deck 2.
3. Press [REV MODE] to select reverse mode.
4. Press [a REC/STOP].
Notes
•
You cannot open deck 1 while recording.
•
You cannot fast-forward or rewind one deck while recording with
the other.

Tape-to-tape recording

The recording level will be recorded as it is on the tape being played
back.
Press [TAPE, DECK 1/2].
1
Press [c OPEN] on both decks and insert the tapes.
2
For playback: Into deck 1
For recording: Into deck 2
Close the holders by hand.
Tape direction is automatically set to " 3".
Press [REV MODE] to select the reverse mode.
3
Every time you press the button:
:One side is recorded, then recording stops
automatically.
:Both sides (front side
,
then recording stops automatically.
Press [TAPE EDIT] to start recording.
4
•
If you selected "
automatically change to "
To stop recording
Press [L].
Both decks will stop.
To start recording on the reverse side
Load a tape and change the tape direction as follows:
1. Press [TAPE, DECK 1/2] and select tape deck 2.
2. Press [/] and immediately thereafter [L]. The tape direction will
be shown as "4".
To record from a specific point on a tape
Before recording, advance the tape to the point from where you want
to start recording.
reverse side) are recorded,
" in step 3, the direction will
" when recording starts.
21
RQT5539