Before Recording (Deck 2 Only) - Panasonic SC-AK15 Operating Instructions Manual

Oo O
To fast-forward or rewind the tape
Press t<4/<4 or >>/ in the stop mode.
Ce o a
Oo | e
To find the beginning of a program
(TPS: Tape Program Sensor)
Press <4/<4 or >/ during play.
Tape To play the current tune To play the next tune
direction | from the beginning from the beginning
ee m a
The TPS function searches for silent parts of about 4 seconds in
length which are normally found between tunes. As a result, it may
not function properly in the following cases
e With short silent parts
* When noise occurs between tunes
e With silent parts found within tunes
Before recording (Deck 2 only)
Types of tapes which can be recorded correctly
The unit automatically identifies the type of tape.
NORMAL POSITION/TYPE |
HIGH POSITION/TYPE II
METAL POSITION/TYPE IV
This system cannot make a recording or erasing correctly, if metal
position tapes are used.
To record from the beginning of the tape
You cannot record on the leader part of the tape. Before recording,
wind the tape past the leader to a point where recording can start
immediately.
x
Recording part
Leader tape
(no recording can be made)
How volume, sound quality/field and V. BASS
affect recording
The tape you are recording is not affected whatever by changes in
volume, sound quality/field or V. BASS.
* In recording, sound quality/field are set automatically to "FLAT".
* You can change volume and V. BASS effect for the playback sound.
Press TAPE DECK 1/2.
Insert the recorded tape into Deck 2.
Press REV MODE to select reverse mode.
Press ®REC/STOP. PFon>
e You cannot open Deck 1 while recording.
+ You cannot fast-forward or rewind one deck while recording with
the other.
fons
tio
in op
rd
b
$:
$
fe]
Š
N