Recording Tape To Tape - Panasonic RX-DT770 Operating Instructions Manual

22
Recording Tape to Tape
When the Deck 1 pause and record buttons are pressed, tape editing starts by pressing the Deck 2 playback button.
Only normal tape can be used with this unit.
MAdARRREIAAAMAAARRRRATAYAARERPRBAAAdHATTERPELAA Y" " "Py PPAANIyIHUHEHPPITE eee re
Press Deck 1 STOP/EJECT
and insert the tape to be re-
corded.
insert the tape with the side to be re-
corded facing you.
Press Deck 2 STOP/EJECT
_and insert the tape to be
played back.
Insert the tape with the side to be
played facing you.
ИТПИ
4 TAPE EDIT Select the editing speed by
NORMAL-] THIGH setting TAPE EDIT.
ПШ 1] нен © : High speed
NORMAL: Normal speed
Press Deck 1 PAUSE, then
press ө (REC).
ws A
3 STOPÆJECT
Press the Deck 2 PLAY.
Editing is started by means of the synchro-start function.
Do not set the "CD" or "RADIO" function selector during editing.
Do not change the editing selector during editing. The playback
sound may flutter.
Some TV sets generate noise that could be recorded during editing.
To prevent the possibility of this, do not use this unit closer than
1.5 m to a TV set.
To stop the editing:
Press the Deck 1 and Deck 2
STOP/EJECT.
For your reference:
Recording is not affected by changes made to the volume or tone
quality during the recording.
The recording level and the noise reduction effect of the original
(playback) tape will be recorded on the new tape.