Before Recording (Deck 2 Only) - Panasonic SC-AK17 Operating Instructions Manual

A
Recording part
B
1
5
1
2
3
4
5
Leader tape (no recording
can be made)
2
4
3

Before recording (Deck 2 only)

Types of tapes which can be recorded correctly
The unit automatically identifies the type of tape.
NORMAL POSITION/TYPE I
HIGH POSITION/TYPE II
METAL POSITION/TYPE IV
This system cannot make a recording or erasing correctly, if metal
position tapes are used.
To record from the beginning of the tape A
You cannot record on the leader part of the tape. Before recording,
wind the tape past the leader to a point where recording can start
immediately.
How volume, sound quality/field, super woofer(for
SC-AK27) and V.BASS(for SC-AK17) affect recording
The tape you are recording is not affected whatsoever by changes in
volume, sound quality/field, super woofer(for SC-AK27) or V.BASS(for
SC-AK17).
•
In recording, sound quality/field are set automatically to "FLAT".
•
You can change volume, super woofer(for SC-AK27) and
V.BASS(for SC-AK17) effect for the playback sound.
To erase a recorded sound B
Press [TAPE].
1
Insert the recorded tape into deck 2.
2
3
Except for SC-AK17 model and SC-AK27 Australia and
New Zealand model
Press [DOLBY NR] so that the Dolby NR indicator
goes off.
Press [REV MODE] to select reverse mode.
4
Press [a REC/STOP].
5
Notes
•
You cannot open deck 1 while recording.
•
You cannot fast-forward or rewind one deck while recording with
the other.
Your attention is drawn to the fact that recording pre-recorded
tapes or discs or other published or broadcast material may
infringe copyright laws.
\
\
21
RQT4708