Before Recording (Deck 2 Only).20 - Panasonic SC-AK27 Operating Instructions Manual

Before recording (Deck 2 only)
Types of tapes which can be recorded correctly
The unit automatically identifies the type of tape.
NORMAL POSITION/TYPE 1
O
HIGH POSITIONTYPE II
O
METAL POSITION/TYPE IV X
This system cannot make a recording or erasing correctly, if metal
position tapes are used.
To record from the beginning of the tape □
You cannot record on the leader part of the tape. Before recording,
wind the tape past the leader to a point where recording can start
immediately.
How volume/ sound quality/field, super wooferffor
SC-AK27) and V.BASS(for SC-AK17) affect record¬
ing
The tape you are recording is not affected whatsoever by changes in
volume, sound quality/field, super woofer(for SC-AK27) or V.BASS(for
SC-AK17).
• In recording, sound quality/field are set automatically to "FLAT.
• You can change volume, super woofer(for SOAK27) and
V.BASS(for SC-AK17) effect for the playback sound.
To erase a recorded sound □
Press [TAPE].
Insert the recorded tape into deck 2.
Press [REV MODE] to select reverse mode.
Press [• REC/STOP].
• You cannot open deck 1 while recording.
• You cannot fast-forward or rewind one deck while recording with
the other.