Paging Code Memory; Setting Paging Codes - Kenwood TH-78A Instruction Manual

Unlike DTSS, the calling station code displays on the transceiver so the receiving party can identify the calling station.
If called with an individual code, the individual caller code displays. When called with a group code, the group code
displays.
1 Paging Operation Overview
Set your station code
Tune to frequency of the other station
Enter the paging mode
Set the code of
station to be called
Transmit
Call
2

Paging Code Memory

There are 8 paging code memories.
Memory
Code
A Stores your station ID code in memory.
0 Automatically stores the calling station's
code during reception. Can temporarily set
the code for the station to be called.
1~6 Stores group codes and local station
codes in memory.
3

Setting Paging Codes

First, you must program your Individual Code into Memory A.
1) Press the F key then press the 1 key to enter the Paging mode.
2) Press and hold the F key for longer than one second, then press the 1 key to enter the code setting mode.
Stand-by
Use
Page 31