Getting Started - Siemens SITRANS L Compact Operating Instructions

Getting started

Use this chapter as a quick reference. It provides links to the steps required for startup.
Before you begin, read the following safety information:
• General safety information (Page 11)
• Basic safety information: Installing/mounting (Page 15)
• Basic safety information: Connecting (Page 28)
• Basic safety information: Commissioning (Page 48)
Procedure
1. Install/mount the device.
Installing/mounting (Page 15)
2. Connect the device.
Connecting (Page 28)
3. Power up the device.
Device startup (Page 50)
4. Commission the device via quick commissioning wizard:
Quick commissioning: Level/Space/Distance (Page 57)
Quick commissioning: Volume (Page 63)
Quick commissioning: Volume flow (Page 71)
5. Setup pumps (if applicable).
Pump control (Page 82)
6. Configure basic control relays (if applicable).
Basic control (Page 88)
7. Configure alarms (if applicable).
Alarms (Page 91)
8. Configure totalizers and samplers (if applicable) referencing the respective parameters.
Startup is complete.
6
SITRANS LT500 with ultrasonic transducer inputs
Compact Operating Instructions, 02/2024, A5E52021877-AA
1