Subaru Solterra 2024 Manual page 81

Once installation is complete, a message is displayed stating
●
that the update has finished.
Leave the USB connected if the system needs to be restarted.
●
A message will appear when restart is ready. Touching [Yes]
restarts the system.
6. Remove the USB flash drive.
To check the software update history, touch [History] on the
●
software update history screen.
If the software update was done offline, an update completion
●
report data will be created on the USB flash drive. It is neces-
sary to upload the update completion report data to the portal
site.
NOTICE
Do not remove the USB flash drive or turn the power switch off while the
software is updating.
Related Links
Connecting a device via the USB port(P. 35)
2-9. Vehicle settings
2
81