Subaru Solterra 2024 Manual page 272

8-2. Panoramic view monitor
• There is an obstacle in front of the camera
• The tires were replaced
• The back door is open and the camera is not in the correct position
• The road surface is slippery or the wheels slip
• The vehicle is on a hill or other steep roads
● As vision that was captured in the past is being displayed, the screen
and the actual situation may differ in the following cases:
• An obstacle appears or moves after vision is captured
• Sand or snow crumbles and moves after vision is captured
• Mud or puddles are in the display range
• When the vehicle slips
● Part or all of the transparent underfloor vision may appear black in the
following cases:
• The vehicle starts moving with no captured vision
• The steering wheel is turned more than a certain angle
• The vehicle stops and a certain amount of time passes
WARNING
● The tire and vehicle guide lines may not align correctly with the actual
vehicle position due to the number of passengers, vehicle load, road
gradient, road surface conditions, brightness of the surroundings, op-
tional equipment, tire replacements, and other reasons. Always make
sure to check your surroundings while you are driving.
● Displayed vision is vision that was captured in the past. Therefore, if
obstacles and other objects move after being captured, the transparent
underfloor vision and the actual situation may not always match.
Related Links
Changing the panoramic view monitor settings(P. 275)
272