Subaru Solterra 2024 Manual page 77

Setting
[History]
[License infor-
mation]
Updating the software
Use one of the following methods to update the software:
Update the software using Data Communication Module
●
(DCM)
Update the software using Wi-Fi
●
Update the software using a USB flash drive
●
INFORMATION
● Map data cannot be updated using this service.
● Some operations cannot be performed while the software is updating.
● If there are any questions, contact your SUBARU dealer.
NOTICE
● To update the software using a USB flash drive, a USB flash drive
that has more than 4 GB of available space and a computer that can
connect to the internet are required. Note that communication charges
may be high depending on your computer environment.
● Update the software at your own risk.
● The software cannot be restored to the previous version once the soft-
ware has been updated.
● The update software can only be used on this system. It cannot be
used on any other device.
● Depending on the content of the software update, some settings may
be reset. If that happens, reconfigure the applicable settings after the
software has been updated.
● Although basic functions are possible during the software update, oper-
ation may be slow. If possible, do not operate the system.
This function is not available in some regions.
*1 :
Check software update history.
This setting will not be displayed if there is no update
history.
Check the software license information.
2-9. Vehicle settings
Description
®
2
77