3-1. Using the Bluetooth
Precautions when using Apple CarPlay and Android Auto(P. 120)
Registering from a Bluetooth
If the Bluetooth
media system, register by searching for the multimedia system from
®
the Bluetooth
1
Touch [
] from the main menu.
2
Touch [Bluetooth & Devices] on the sub menu.
If no device is registered, proceed to Procedure 4.
3
Touch [Add another device].
While a device is connected to the multimedia system, the confirmation
screen for disconnecting the device may be displayed. Disconnect the
device to perform registration.
4
Register the multimedia sys-
tem from the Bluetooth
vice to be used.
●
Perform the operation according
to the operating procedure of
the Bluetooth
●
Be sure to display this Blue-
®
tooth
connection screen before
performing registration on the Bluetooth
5
Check that the displayed PIN code matches the PIN code
displayed on the Bluetooth
●
Some Bluetooth
istration.
●
When an HFP supported Bluetooth
is automatically set as the primary device if the driver does not have a
primary device set.
●
The Apple CarPlay or Android Auto settings may be displayed. The
Apple CarPlay or Android Auto screen will be displayed if the use of
either is enabled.
●
A message indicating that connection is complete is displayed, and
the name of the registered Bluetooth
menu.
●
If an operation failed screen is displayed, follow the operation instruc-
tions on the screen.
102
®
function
®
device cannot be found by searching with the multi-
device.
®
de-
®
device.
®
devices may need to be operated to complete reg-
®
device
®
device.
®
device, and then touch [OK].
®
device is registered, that device
®
device is displayed in the sub