Subaru Solterra 2024 Manual page 59

[Delete driver]
Registering face identification
Face identification enables the system to identify the driver.
1 Touch [ ] from the main menu.
2 Touch [Personal info] on the submenu.
3 Touch [Setup face].
4 Carefully read the Terms of Service and touch [Accept].
5 Look directly at the driver
monitor camera, ensure only
your face is being displayed,
and then touch [Begin].
6 The system will start scanning your face.
● Once registration is complete, a message is displayed on the screen.
● If an error message appears, follow the on-screen instructions and try
again.
Troubleshooting
If there is a problem with the user profile function, first check the
table below.
Problem
Unable to load saved
profile
If equipped
*1 :
Refer to the vehicle "OWNER'S MANUAL"
*2 :
Cannot be used with fleet vehicles such as rental cars.
*3 :
Setting
Likely cause
System is not loading
the previously saved
profile.
2-3. Driver settings
Description
The selected user profile will be
removed from the vehicle.
Turn the Bluetooth
setting on and ensure
the device is paired
with the system and set
as primary device.
Solution
®
59
2