WARNING
Do not attach stickers (including trans-
●
parent stickers) or other items to the
area of the windshield in front of the
Advanced Drive camera (shaded area
in the illustration).
From the top of the windshield to
A
approximately 0.4 in. (1 cm) below
the bottom of the Advanced Drive
camera
Approximately 14.2 in. (36 cm)
B
(Approximately 7.1 in. [18 cm] to the
right and left from the center of the
Advanced Drive camera)
Do not attach accessories which may
●
obstruct the Advanced Drive camera
to the hood, front grille, or front
bumper.
●
If a surfboard or other long object is to
be mounted on the roof, make sure
that it will not obstruct the Advanced
Drive camera.
■
Precautions for the LiDAR sensors
Observe the following precautions.
●
Failure to do so may lead to malfunction
of a LiDAR sensor and Advanced Drive
not operating properly, possibly leading
to an accident resulting in death or seri-
ous injury.
• Do not subject a LiDAR sensor or its
surrounding area to strong impact.
If subjected to a strong impact, the
LiDAR sensor may move out of align-
ment and objects may no longer be
detected correctly. In this case, have the
vehicle inspected by your Lexus dealer.
1-2. Using Advanced Drive
• Do not disassemble or modify the
LiDAR sensors.
• Do not change the position of the
LiDAR sensors or remove them.
• Do not attach accessories, stickers
(including transparent stickers), etc. to
the LiDAR sensors.
• Do not install accessories such as
license plate covers or frames
• Do not attach accessories to the front
bumper, front grille, rear bumper, or
front fenders near the LiDAR sensors.
• Do not modify the front bumper, front
grille, rear bumper, or front fenders
near the LiDAR sensors.
• Do not apply wax, coatings, surfac-
tants, abrasive compounds, etc. to the
LiDAR sensors.
• Keep the LiDAR sensors and their sur-
rounding area clean at all times.
When cleaning, make sure that the sur-
face of the LiDAR sensors and their sur-
rounding area are cool, and use a damp,
soft cloth to remove dirt so as to not mark
or damage it.
Take care as the LiDAR sensors or
●
their surrounding area may be
extremely hot and possibly cause
burns.
●
The LiDAR sensors use lasers
• If a LiDAR sensor has been scratched
*2
or cracked
, have the vehicle
inspected by your Lexus dealer.
If a LiDAR sensor that has been
scratched or cracked is looked into, the
laser may cause serious eye injury or, in
the worst case, blindness.
• Do not disassemble or modify
LiDAR sensors.
The laser may cause serious eye injury or,
in the worst case, blindness.
17
1
*1
.
*2
the