Lexus LS500H 2022 Owner's Manual page 12

Hide thumbs Also See for LS500H 2022:
Table of Contents

Advertisement

12
1-2. Using Advanced Drive
is not in an area where use is possible
(P.22, 22). Attempt to use the system
again after entering an area where use is
possible.
• The system cannot be used when traffic
information, such as road closures, is
received. Wait for the restriction to be
removed or attempt to use the system
again in an area which is not restricted.
"Advanced DriveTemporarily Unavail-
able"
• The system temporarily cannot be used,
as another system is operating. Wait for a
while before attempting to use the sys-
tem.
"LiDAR Unavailable", "Sensor Unavail-
able", "Sensor Unavailable Clean Sen-
sor"
• Dirt, water, snow, ice, etc. may be
attached to the displayed sensor or its
surrounding area. Remove the foreign
matter and drive the vehicle for a while
before attempting to use the system.
"Camera Unavailable"
• The system cannot be used as a camera
has become too hot, such as after the
vehicle has been parked in the sun. Use
the air conditioning system to decrease
the temperature inside the vehicle.
• The system cannot be used as a camera
has become too cold, such as after the
vehicle has been parked in an extremely
cold area. Use the air conditioning sys-
tem to increase the temperature inside
the vehicle.
• The system cannot be used as a camera is
obstructed. Check for any foreign matter,
etc. that may be obstructing the camera.
• The system cannot be used as the sur-
rounding area cannot be detected due to
it being too dark or bright, or inclement
weather (rain, fog, snow, sandstorm, etc.)
Attempt to use the system after condi-
tions become suitable for system opera-
tion.
If any other message is displayed, follow the
instructions displayed.
Disabling Advanced Drive
Advanced Drive can be disabled on
the multi-information display. (P.49)
WARNING
For safe use
Driving safely is the sole responsibility of
the driver. Do not overly rely on this sys-
tem, and pay careful attention to the sur-
rounding conditions in order to ensure
safe driving.
Advanced Drive is not an automated
driving system.
This system provides the driver with
information and driving assistance
according to the road shape and condi-
tions, traffic conditions, and the condition
of the driver themself. Always pay careful
attention to the surrounding conditions
as use of the system is the responsibility
of the driver.
Depending on the condition of the sur-
rounding area, the road, or the driver,
Advanced Drive may not operate or
operation may be suspended. Also, it
may not always be able to achieve the
same level of performance. Read the
operating conditions of each function
carefully. Do not overly rely on this sys-
tem and always drive carefully.
As the recognition performance and
control performance of Advanced
Drive are limited, driver operation is
necessary to ensure safety while the
system is operating.
It is the driver's responsibility to pay care-
ful attention to their surroundings and be
ready to take over driving at any
moment.
Even if Advanced Drive is operating
properly, the surrounding conditions
as recognized by the driver and
detected by the system may differ.
Therefore, it is necessary for the driver
to pay attention, assess risks, and
ensure safety. Over-reliance on this
system to drive the vehicle safely may
lead to an accident resulting in death
or serious injury.
of

Advertisement

Table of Contents
loading

Table of Contents