Watchguard Firebox SOHO 6 Wireless User Manual page 92

Chapter 5: Administrative Options
Here is an example of how the Wireless Remote Management
feature can be used. First, the remote computer connects to the
SOHO 6 Wireless through a standard Internet connection. Then the
MUVPN client software is activated. Finally, the MUVPN client
creates an encrypted tunnel to the SOHO 6 Wireless. The remote
computer can now access the configuration pages of the SOHO 6
Wireless without compromising security.
Here is another example of how the Wireless Remote Management
feature can be used. Use a Pocket PC to connect to the SOHO 6
Wireless through the Internet. The Pocket PC client software
creates an encrypted tunnel to the SOHO 6 Wireless. The remote
computer can now access the configuration pages of the SOHO 6
Wireless without compromising security.
1 First, follow the instructions in "System security" on page 64.
2 Select the Enable SOHO 6 Wireless Remote Management
checkbox.
3 Type the Virtual IP address in the applicable field. This is the
address that is used to connect to the SOHO 6 Wireless for
remote management.
4 Select an authentication algorithm from the Authentication
Algorithm drop-down list.
The selections are MD5-HMAC (128-bit authentication) or SHA1-HMAC
(160-bit authentication).
5 Select an encryption algorithm from the Encryption Algorithm
drop-down list.
The selections are DES-CBC or 3DES-CBC.
6 Select the VPN client type from the VPN Client Type drop-
down list.
The selections are Mobile User (MUVPN) or Pocket PC.
7 Click Submit.
66 WatchGuard Firebox SOHO 6 Wireless