Watchguard Firebox SOHO 6 User Manual page 132

Chapter 10: MUVPN Clients
8 Click OK to close the Network window.
Click Cancel if you do not want to save the changes.
9 Reboot the computer.
Installing the Client for Microsoft Networks
The Client for Microsoft Networks must be installed before you
can configure network names. If the Client for Microsoft Networks
is not installed, follow these steps.
From the Network window:
1 Click the Configuration tab and then click Add.
The Select Network Component Type window appears.
Select Client and then click Add.
2
The Select Network Client window appears.
3 Select Microsoft from the list at left. Select Client for Microsoft
Networks from the list at right and then click OK.
4 Select Client for Microsoft Networks and then click
Properties.
5 Select the Log on to Windows NT domain checkbox.
6 Type the domain name in the Windows NT Domain text field.
Examples of typical domain names are "sales", "office", and
"warehouse".
7 Select the Logon and Restore Network Connections checkbox.
Installing Dial-Up Networking
Dial-Up Networking must be installed before the Mobile User
VPN Adapter can be installed. If Dial-up Networking is not
installed, follow these steps.
From the Windows desktop:
Select Start => Settings = > Control Panel.
1
2 Double-click the Add/Remove Programs icon.
The Add/Remove Properties window appears.
110 WatchGuard Firebox SOHO 6