Watchguard Firebox SOHO 6 User Manual page 135

2 Double-click the Network icon.
The Network window appears.
3 Click the Services tab and then click Add.
4 Select Remote Access Services from the list and then click OK.
5 Enter the path to the Windows NT install files or insert your
system installation CD and then click OK.
The Remote Access Setup window appears.
6 Click Yes to add a RAS device, such as a modem, and then click
Add.
7 Complete the Install New Modem wizard.
If there is no modem installed, you can select the Don't detect my modem;
I will select it from a list checkbox. Select the standard 28800 modem.
To install RAS, Windows NT requires at least one RAS device, such as a
modem, to be installed. If a modem is not available, a serial cable
between two computers can be selected.
8 Select the modem added in the previous step from the Add
RAS Device window.
9 Click OK, click Continue and then click Close.
10 Reboot the computer.
Configuring the WINS and DNS settings
The remote computer must be able to communicate with the WINS
servers and the DNS servers. These servers are located on the
trusted network that is protected by the SOHO 6.
From the Windows desktop:
1 Select Start => Settings = > Control Panel.
2 Double-click the Network icon.
The Network window appears.
User Guide
Preparing the Remote Computers to Use the MUVPN Client
N
OTE
113