Watchguard Firebox SOHO 6 User Manual page 74

Chapter 5: Administrative Options
Here is an example of how the Remote Management feature can be
used. First, the remote computer connects to the SOHO 6 through a
standard Internet connection. Then the MUVPN client software is
activated. Finally, the MUVPN client creates an encrypted tunnel
to the SOHO 6. The remote computer can now access the
configuration pages of the SOHO 6 without compromising
security.
Here is another example of how the Remote Management feature
can be used. Use a Pocket PC to connect to the SOHO 6 through the
Internet. The Pocket PC client software creates an encrypted tunnel
to the SOHO 6. The remote computer can now access the
configuration pages of the SOHO 6 without compromising
security."System security" on page 50
1 First, follow the instructions in "System security" on page 50.
2 Select the Enable SOHO 6 Remote Management checkbox.
3 Type the Virtual IP address in the applicable field.
This address is used by the remote management computer to connect to
the SOHO 6.
4 Select an authentication algorithm from the Authentication
Algorithm drop-down list.
The selections are MD5-HMAC (128-bit authentication) or SHA1-HMAC
(160-bit authentication).
5 Select an encryption algorithm from the Encryption Algorithm
drop-down list.
The selections are DES-CBC or 3DES-CBC.
6 Select the VPN client type from the VPN Client Type drop-
down list.
The selections are Mobile User (MUVPN) or Pocket PC.
7 Click Submit.
8 Install and configure the MUVPN client on the remote
computer.
For this information, see Chapter 10 "MUVPN Clients" on page 105.
52 WatchGuard Firebox SOHO 6