Watchguard Firebox SOHO 6 User Manual page 150

Chapter 10: MUVPN Clients
4 Select Pre-Shared Key from the Authentication Method drop-
down list.
Phase 1 values must be as specified in the following steps. Phase 2 values
must match the settings of the Firebox SOHO 6.
5 Select DES from the Encrypt Alg drop-down list and then
select SHA-1 from the Hash Alg drop-down list.
6 Select Unspecified from the SA Life drop-down list.
This is the default setting.
7 Select Diffie-Hellman Group 1 from the Key Group drop-
down list.
8 Expand Key Exchange (Phase 2).
A Proposal entry appears.
9 Select Proposal 1.
The IPSec Protocols settings appear to the right.
128
N
OTE
WatchGuard Firebox SOHO 6