Setting Up Logging To A Watchguard Security Event Processor Log Host - Watchguard Firebox SOHO 6 User Manual

Setting up Logging to a WatchGuard Security Event Processor Log Host

This option synchronizes the clock of the SOHO 6 to your
computer:
• Click Sync Time with Browser now.
The SOHO 6 synchronizes the time at startup.
Setting up Logging to a WatchGuard Security
Event Processor Log Host
The WSEP (WatchGuard Security Event Processor) is an
application that is available with the WatchGuard Firebox System
package used by a Firebox II/III. The WSEP application runs on a
computer that functions as the log host. The WSEP application
records log messages sent from the Firebox II/III. If you have a
Firebox II/III, configure the WSEP to accept the log messages from
your SOHO 6. Then follow these instructions to send your event
logs to the WSEP.
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6.
The default IP address is: http://192.168.111.1
2 From the navigation bar at left, select
Logging = > WSEP Logging.
The WatchGuard Security Event Processor page opens.
User Guide 75