Table of Contents
Advertisement
Device Functions
4.8 Self Test
4.8
Self Test
You can execute the self test by magnet reset to verify the health of the device. During the self test, the device
checks the status of the following:
•
Battery health
The success of self test is indicated by the magnetic reset LED sequence. The failure of battery is indicated by a
specific LED flashing pattern.
For more information about LED flashing sequences, refer to
64
4.10 SICAM FSI LED Flashing
SICAM, Fault Sensor Indicator V2.0 B-Sensor, Manual
E50417-H8940-C656-A1, Edition 08.2023
Sequence.
Advertisement
Table of Contents
Troubleshooting
