Getting Started
3.7 Updating the Device Firmware
3.7
Updating the Device Firmware
•
Download the SICAM FSI V2.0 firmware files and SICAM FSI Configurator (version 3.03 and above) from
the following Siemens Internet page:
–
https://support.industry.siemens.com/cs/ww/en/view/109822242
•
You can also contact local Siemens office or contact customer support for latest SICAM FSI V2.0 B-Sensor
firmware and SICAM FSI Configurator files.
You can update the device firmware via USB Type-C cable with SICAM FSI Configurator (version 3.03 and
above)
Updating the SICAM FSI Firmware via the USB Cable
3.7.1
To update the device firmware via the USB cable, proceed as follows:
With the help of a hot stick, unmount the device. Refer to
²
Connect one end of the USB cable to a PC or laptop computer. Refer to
²
[dw_sfsi_usbtypec_20160208, 1, --_--]
Figure 3-35
(1)
Laptop computer
(2)
USB Type C cable
(3)
USB Type C slot in the device
Log on to device via the SICAM FSI Configurator.
²
For more information about updating firmware, refer to chapter
NOTE
i
i
The device restarts automatically after the firmware update.
50
SICAM FSI Firmware Update via USB
3.6 SICAM FSI B-Sensor Unmounting
3.3
Installation.
5.10.4 Updating
Firmware.
SICAM, Fault Sensor Indicator V2.0 B-Sensor, Manual
E50417-H8940-C656-A1, Edition 08.2023
.