Wasp WWS800 User Manual page 10

Select "Bluetooth Serial Port" from the list.
Click "Property" button.
"Secure Connection". If you have enabled the Authentication and have configured
a PIN Code on the WWS800, leave "Secure Connection" checked. Otherwise,
uncheck it.
Click "Apply" and "OK"
Click "OK" to go back to "My Bluetooth Places"
"Wake up" the WWS800 by pulling the trigger.
Double click "Find Bluetooth Devices".
Now the WWS800 should be shown on the screen with the scanner's serial number
as the device name. For this example, the device name is "SW3000006".