Safety Information hooks, carabiners, and other connectors must be selected and applied in a compatible fashion. WARNING! Failure to understand and comply All risk of disengagement must be eliminated. All with safety regulations may result in serious snap hooks and carabiners must be self-locking, injury or death.
Worker Classifications Applicable Safety Standards Qualified Person: person with Meets or exceeds: accredited degree or certification, and with ANSI Z359.16 extensive experience or sufficient professional OSHA 1910.29 standing, who is considered proficient in OSHA 1926.1053 planning/reviewing the conformity of fall protection and rescue systems.
MINIMUM 2 ft (0,6 m) safety factor, WARNING! Use only with compatible deceleration distance, user height, length of Guardian Cable Climbing System with 3/8” connecting devices, harness stretch, free fall, and diameter 1x7 galvanized Steel cable. all other applicable factors.
Inspection SHOCK ABSORBER INSPECTION: Uncut portions of shock absorber component (see Prior to EACH use, inspect Cable Climbing circled areas in image below) must be intact. If Sleeve for deficiencies, including, but not limited any of the uncut portions of shock absorber are to, corrosion, deformation, pits, burrs, rough broken, it is an indication of excessive force and surfaces, sharp edges, cracking, rust, paint build-...
Minimum Breaking Strength: 3,600 lb (16 kN) Materials Permitted Service Temperature Range: -300 to 1300 F (-340 C to 540 C) Stainless steel, aluminum, bronze Part # Description 25034 Cable Climbing Sleeve, C7, 3/8 Inch Cable Only, ANSI...
Installation and Use Step 1 Before installation, ensure arrow on top front of WARNING! Always utilize a backup fall Cable Climbing Sleeve is pointed in an upward protection system if exposed to the risk of a fall direction. hazard during installation of Cable Climbing Sleeve.
Page 8
Cable Climbing Sleeve should move Sleeve when red indicator is visible may upward freely. If Cable Climbing Sleeve does cause C7 Cable Climbing Sleeve to disengage not move upward freely, remove from service from cable and result in serious injury or and contact Guardian.
Cable Sleeve while actively climbing. only with compatible Guardian Cable Climbing System and 3/8” (9.5mm) diameter 1x7 galvanized steel cable. Lot #: XXXXXX Only attach to sternal D-ring of compatible full body harness. Do not attach lanyard to DOM: MM/YY cable sleeve or exceed 9”...
Page 10
Diagram A - Fall Clearance Diagram B - Connections 2 ft (0,6 m) Swing Fall Free Fall Distance Fall Arrest Distance Harness Stretch Safety Factor Swing Fall WARNING! Eliminate Swing Fall whenever possible! If swing fall exists, always account for additional fall clearance.
Inspection Log Model #: Date of First Use: Serial #: User: Date: Condition: Inspected By:...
Page 12
This warranty is not transferable to any other Guardian service and does not apply to product that is resold after having been put into service. No other person, firm, entity, or the like is authorized to assume or assign for Guardian any other liability in connection with the sale or use of Guardian’s products.