Kenwood TS-450S Instruction Manual page 25

Advanced transmitter functions
VOX switch
When this switch is set to VOX(-), transmission and
reception are switched automatically by voice in SSB, FM,
and AM modes. |
Adjust the VOX gain on the left side according to the
microphone in use.
i When this switch is set to VOX, transmission is selected
automatically when the key is down, and reception is
selected automatically when the key is up.
| M. CH/VFO CH control
| The frequency can be advanced quickly in |
[10kHz steps. The frequency step size |
can be changed to 1 kHz, 2 kHz, or 5
kHz. See page 53.
Tor e
3 5 > 3 dto аз ‫هالا‬‎
= онн I
ПП омтр d» оша луй
рма ааа POL O4
NOTCH —Ə— sa.
а 5
~
Tu E === CUNCIION RIT/XIT —@— :Е SHIFT АР —@— RF Ë
ΓΕ
SPLIT
$ : :
~. E
e
: à frequency.
: PWR control
| Transmission power can
be varied. The maximum
[TX M key
power is obtained by
Press this key to operate the
automatic antenna tuner, if the
unit is installed.
average talk power during transmission.
Adjust it with the MIC gain control so
that it does not exceed the ALC range
| when the speech processor is used.
delay before returning to receive
from transmit can be varied. Set
the control to give the desired
| timing.
25