DELAY
J[ CAR
][ pwr
ΙΓ Mic]
Оооо
j
5) DELAY control
This control adjusts the delay time in VOX
operation. Set it to an appropriate position.
The DELAY control is turned fully
counterclockwise in CW mode for full break-in
(QSK) operation.
$2 CAR(Carrier level) control
Used to adjust carrier level during CW, AM, FM
and FSK.
68 PWR(Power) control
Power can be controlled in all modes. Power is
increased by turning the control clockwise.
Keep the transmit power within the output power
limits of your license.
5) MIC gain control
Microphone gain can be adjusted during SSB
and AM operations. Gain is increased by turning
the control clockwise.
Ш Top of case (TS-690S only)
65) ANTENNA SELECT switch
Select the desired antenna ΗΕ or 50MHz.
20
Ш
Left side of case
56) VOX control
This control adjusts the sensitivity of the VOX
amplifier. Adjust this control for your personal
preference.
57) ANTI control
VOX operations are sometimes difficult with
high speaker volume control settings. The ANTI
control is used to reduce the tendency of the
VOX to activate from inputs from the speaker.
The ANTI control is not active when headphones
are connected.
58 ACC-1 connector
connected here.
ІШ Microphone
(3) PTT (Push To Talk) switch