Basket Lift Tube; Basket Lift Motor - Vulcan-Hart GRC35 Service Manual

GR SERIES GAS FRYERS - REMOVAL AND REPLACEMENT OF PARTS
4. Reverse procedure to install and check for proper
operation.

BASKET LIFT TUBE

WARNING: DISCONNECT THE
ELECTRICAL POWER TO THE
MACHINE AND FOLLOW LOCKOUT /
TAGOUT PROCEDURES. THERE MAY
BE MULTIPLE CIRCUITS. BE SURE
ALL CIRCUITS ARE DISCONNECTED.
1. Remove basket lift cover as outlined in "BASKET
LIFT COVERS" under "COVERS AND PANELS".
2. Remove nut securing lift bar to the lift tube.
3. Remove screws securing lift tube bracket to fryer
then remove bracket and lift tube.
4. Reverse procedure to install.

BASKET LIFT MOTOR

WARNING: DISCONNECT THE
ELECTRICAL POWER TO THE
MACHINE AND FOLLOW LOCKOUT /
TAGOUT PROCEDURES. THERE MAY
BE MULTIPLE CIRCUITS. BE SURE
ALL CIRCUITS ARE DISCONNECTED.
1. Remove basket lift cover as outlined in "BASKET
LIFT COVERS" under "COVERS AND PANELS".
2. Remove basket lift tube as outlined under "BASKET
LIFT TUBE".
3. Disconnect lead wires from cam switch and basket lift
motor.
4. Loosen set screws securing crank arm assembly to
the basket lift motor shaft.
– 15 –
F-25114 Rev.A (07-03)