Sun Microsystems SPARCclassic Service Manual page 63

1. Reconnect the cables.
See "Reconnecting the External Cables" on page 57.
2. Turn on the power in this sequence:
1. External drive units (if any), starting with the unit that is furthest electrically
from the system unit
2. Monitor (if you turned it off)
3. Desktop SPARCstation system unit
3. Boot the operating system.
The operating system may start to boot automatically, or you may need to enter a
command at the system prompt. What you do next depends on the operating
system software you are using. Consult the documentation supplied with your
operating system for instructions on booting and logging in to your system.
49
Power Off and On