Main Logic Board - Sun Microsystems SPARCclassic Service Manual

Figure 11–11
5. Refer to Chapter 7 to perform the following procedures:
4 Detaching the wrist strap
4 Closing the system unit
4 Reconnecting system components
6. Refer to Chapter 6 to turn the power on.
Caution -
close the system unit before turning on the power. It is not safe to operate the system
unit while it is open. See "Closing the System Unit" on page 55 for instructions.

Main Logic Board

This section explains how to remove and replace the main logic board (MLB).
SPARCclassic/SPARCclassic X/SPARCstation LX Service Manual ♦ Revision A, November 1993
124
Installing a DSIMM
When you are finished installing parts inside the system unit, be sure to