Sun Microsystems SPARCclassic Service Manual page 107

4. Loosen the captive Phillips-head screw that secures the disk drive mounting
bracket to the system chassis.
See Figure 9–13 and Figure 9–14 for the screw's location.
Lift up the bracket as you loosen the screw until the bracket disengages from the
unit top.
Figure 9–13 Removing the Disk Drive Mounting Bracket
5. Remove the disk drive mounting bracket.
a. Carefully bend the power cables where they exit the power supply so that
the mounting bracket can be removed without snagging or cutting the
cables.
b. Tilt the bracket up and away from the power supply (see Figure 9–13).
c. Lift the bracket out of the system unit and place it on an antistatic mat.
93
Storage Devices