Broiler Manifold Cover; Kick Panel Assembly - Vulcan-Hart G260 Service Manual

ENDURANCE SERIES GAS RANGES - REMOVAL AND REPLACEMENT OF PARTS
4. Remove the screw securing the oven control
panel and remove the panel.
5. Reverse the procedure to install the oven control
panel.

Broiler Manifold Cover

1. Rotate the yellow gas shut-off valve to the OFF
position and allow range to cool.
2. Loosen the setscrew in the side of the burner
control knobs and remove knobs.
3. Remove screws holding manifold cover in place
and remove broiler manifold cover.
4. Reverse the procedure to install the broiler
manifold cover.

Kick Panel Assembly

1. Open kick panel.
2. Remove two screws securing left hinge and
remove hinge.
3. Slide kick plate to the left to disengage from left
hinge.
4. Reverse the procedure to install the kick plate
assembly.
Page 5 of 23 F35425 (October 2005)