Table of Contents
Advertisement
Installation
Glass removal - accessing the parts
To gain access to the various components required for installation follow the below steps to remove
the glass panel on the front of the appliance.
1
3
Removing the wall mounting bracket
The wall mounting bracket is secured to the rear panel of the appliance. Remove the screws and
the wall mounting bracket and put aside for later use.
Power cord
After inserting the power cord into the socket on the bottom right side of the appliance, secure in
place using the power cord securing bracket and ST4*8 screws (found in box 1). If not secured the
connection can become loose during installation which may present a sparking hazard.
•
Ensure the power cord is not squashed, kinked, or in contact with hot or sharp appliances
•
Do not route the power lead in front of the appliance
Wall mounting bracket
14 | Electric fires operation and installation guide 17904-B
2
Suction Cup x 2
4
Power cord
Advertisement
Table of Contents
