Table of Contents
Advertisement
4.10
Mark/Period Function — Operation
4.10.1
This sub-section is a guide to the use of the 9100 for generating a rectangular wave with
required repetition rate and mark/period ratio. The following topics are covered:
4.10.2 Selection of Mark/Period function.
4.10.2.1 'Hz' Key.
4.10.2.2 Default Settings.
4.10.3 Screen Keys.
4.10.3.1 Bottom Screen Keys.
4.10.3.2 Right Side Screen Keys.
4.10.4 Value Editing.
4.10.4.1 'Mark' and 'Period' Time-Intervals, High and Low Levels.
4.10.4.2 'Mark' and 'Period' Time-Interval Editing.
4.10.5 Crossing Thresholds.
4.10.5.1 Time-Interval Resolution Thresholds.
4.10.5.2 Analog Hardware Configurations.
4.10.6 Mark/Period Routines for Calibrating UUTs.
4.10.6.1 Interconnections
4.10.6.2 Using the 9100 as a Fixed Source
4.10.6.3 Using the 9100 as an Adjustable Source
In this sub-section, we deal with the full range of 'Mark/Period' facilities, in a concise way.
For those who require more detailed instructions for manipulating the front panel
controls, the DC Voltage function was used as an example for the general familiarization
tutorials in Section 3.
Section 4: Using the Model 9100: Mark/Period Function
Final Width = 215mm
4.10-1
Advertisement
Chapters
Table of Contents
