Final Width = 215mm
4.4-2
Section 4: Using the Model 9100: AC Voltage Function
4.4.2
Selection of AC Voltage Function
(Manual Mode selected)
4.4.2.1
'V' Key
Voltage is selected by pressing the
'V'
key at the top right of the
panel.
4.4.2.2
Default Settings
At power-on and each time the
'V'
key is pressed, the system defaults into DC Voltage
function.
If DC Voltage is already active, then the AC Voltage menu screen is opened by pressing
V screen key on the bottom row.
the
Whenever the AC Voltage menu screen is opened, except on recovery from a standby
period, it will appear with the following default settings:
V
.
.
TODAYS DATE
WAVE
V
FORM
'CALIBRATION SYSTEM'
Peak 1.41421 V
x
Mean 0.90032 V
÷
V
kHz
Z E R O
TIME
∆Φ
∆%