Table of Contents
Advertisement
Chapter 6 Maintenance — Light source/temperature indicators
Temperature indicator <TEMP>
Indicator status
f Warm-up status
Lighting red
f Internal temperature is high
(warning).
Blinking red
f Internal temperature is high (standby
(2 times)
status).
Blinking red
f The cooling fan has stopped.
(3 times)
*1 For the operating environment temperature of the projector, refer to "Operating environment" (x page 292).
Note
f If the temperature indicator <TEMP> is still lit or blinking after taking the measures, ask your dealer for repair.
Status
f Wait five minutes when the power is turned on while the temperature is low
(approximately 0 °C (32 °F)).
f Use the projector in an appropriate operating environment temperature
f Remove any objects if they are blocking the intake/exhaust vents.
f Use the projector in an appropriate operating environment temperature
f Do not install the projector at an altitude of 4 200 m (13 780') or higher
above sea level. (Altitude of 4 200 m (13 780') above sea level is the
maximum height that the performance of this projector is guaranteed.)
f Turn the <MAIN POWER> switch to <OFF> (x page 80), and consult
your dealer.
Solution
ENGLISH - 269
.
*1
.
*1
Advertisement
Table of Contents
