Panasonic PT-REQ10 Operating Instructions Manual page 184

[SIGNAL INFORMATION]
*1 The temperature status is indicated with text color (green/yellow/red) and bar scale. Use the projector within the range that the indication is
green.
*2 [CONSOLIDATED RUNTIME] can be obtained with the following calculation formula. Values obtained by the calculation formula contain a
slight error.
*3 The angle value displayed is relative to the benchmark (zero calibration reset state / zero calibration implementation state) selected on the
[ANGLE MONITOR] screen.
A x 1.0 + B x 0.8
f A: Runtime of the light source with [OPERATING MODE] set to [NORMAL], [QUIET], [USER1], [USER2], or [USER3]
f B: Runtime of the light source with [OPERATING MODE] set to [ECO]
r [DETAILED INFORMATION]
[INPUT]
[SIGNAL FORMAT]
[SIGNAL FREQUENCY]
[SCAN TYPE]
[TOTAL DOTS]
[DISPLAY DOTS]
[TOTAL LINES]
[DISPLAY LINES]
[SAMPLING]
[BIT DEPTH]
[SIGNAL LEVEL]
[COLORIMETRY]
[HDCP STATUS]
[SDI ERROR STATUS]
r [CONTENT INFORMATION]
[EOTF]
[MASTERING DISPLAY
COLOR VOLUME]
184 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
[INPUT]
[SIGNAL FORMAT]
[LINK]
[SAMPLING]
[BIT DEPTH]
[SIGNAL LEVEL]
[GAMMA]
[COLOR SPACE]
Conversion formula for [CONSOLIDATED RUNTIME]
Displays the input used for the projected image.
Displays the format of the input signal.
Displays the frequency of the input signal.
Displays the scan type of the input signal.
Displays the total dot count of the input signal.
Displays the number of input signal display dots.
Displays the total line count of the input signal.
Displays the number of input signal display lines.
Displays the sampling information and the color format of the input signal.
Displays the gradation of the input signal.
Displays the signal level of the input signal.
Displays the color gamut information of the input signal. The content of display is as follows.
[ITU-2020]: When the color gamut is compliant with ITU-R BT.2020 standard
[ITU-709]: When the color gamut is compliant with ITU-R BT.709 standard
[SMPTE 170M]: When the color gamut is compliant with SMPTE 170M standard
[---]: When there is no signal, when the color gamut information is not included in the InfoFrame
information, or when the color gamut information other than [ITU-2020], [ITU-709], or [SMPTE 170M] is
included
Displays the HDCP status of the input signal. The content of display is as follows.
[HDCP2.X]: When protected with HDCP 2.2 or HDCP 2.3
[HDCP1.X]: When protected with HDCP 1.X
[NONE]: When not protected with HDCP
[---]: When there is no signal
Displays the error status of the SDI input.
Displays EOTF (Electro-Optical Transfer Function) out of the InfoFrame information added to the input
signal.
[RED]
[GREEN]
[BLUE]
[WHITE]
[MAX LUMINANCE]
[MIN LUMINANCE]
Displays the input terminal used for the projected image.
Displays the representative input terminal when one image is
displayed with multiple input signals.
Displays the format of the input signal.
Displays the [SDI LINK] setting.
Displays the determination result of the signal when [AUTO] is set.
Displays the sampling information and the color format of the input
signal.
Displays the gradation of the input signal.
Displays the signal level of the input signal.
Displays the [GAMMA] setting.
Displays the [COLOR SPACE] setting.
Displays the chromaticity coordinates for the primary color red out of the
InfoFrame information added to the input signal.
Displays the chromaticity coordinates for the primary color green out of
the InfoFrame information added to the input signal.
Displays the chromaticity coordinates for the primary color blue out of the
InfoFrame information added to the input signal.
Displays the chromaticity coordinates for the white point out of the
InfoFrame information added to the input signal.
Displays the maximum brightness out of the InfoFrame information added
to the input signal.
Displays the minimum brightness out of the InfoFrame information added
to the input signal.