Table of Contents
Advertisement
Example of the E-mail sent for an error
The following E-mail is sent when an error has occurred.
f Example: When [MAIL CONTENTS] is set to [SIMPLE] in the [E-mail set up] page
=== Panasonic projector report(ERROR) ===
Projector Type
Serial No
----- Wired network configuration (IPv4) -----
DHCP Client
IP address
MAC address
----- Wired network configuration (IPv6) -----
Auto Configuration
Link Local Address
MAC address
----- Wireless network configuration -----
IP address
MAC address
----- Error information -----
SELF TEST
U081 Low AC voltage warning (below 90V)
Mon Jan 01 12:34:56 20XX
----- Memo -----
[User function set up] page
Set the function limitation for the user rights.
Click [Detailed set up] → [User function set up].
1
[Remote preview lite]
To disable the remote preview lite function with the user rights,
set [Disable].
[Status notification] page
Set the push notification function. A push notification of updated information is sent to the application software
linked to the projector, such as the "Multi Monitoring & Control Software", when there is a change in status, such
as occurrence of an error in the projector.
Click [Detailed set up] → [Status notification].
1
[Error alert notification]
Set to [Enable] to use the push notification function.
2
[Notification IP address]
Enter the IP address of the notification destination.
250 - ENGLISH
Chapter 5 Operations — Using the web control function
: PT-REQ12
: 123456789012
OFF
192.168.0.8
00:0B:97:41:E7:E5
ON
fe80::20b:97ff:fe41:e7e5
00:0B:97:41:E7:E5
192.168.13.45
12:34:56:78:90:12
: WARNING
1
2
2
[Submit]
Updates the setting.
1
2
3
4
3
[Notification port]
Enter the port number of the notification destination.
4
[Submit]
Updates the setting.
Advertisement
Table of Contents
